Skip Hire and Waste Management Specialists

How To Clean Blocked Bathtub


An obstructed drain is extremely stressful, however it does not signify that you need to get in contact with a plumber. Majority of the blocked drains may be simply cleaned by making use of the things that are over the residence or some low-cost equipments.

Drain Anatomy

Every drain has a similar construction. At the end of the drainpipe is a curved part known as a trap, blow the sink, this trap’s format is like an “U”. Majority of bathtubs have a little different format of traps, known as “P” trap as it is shaped like the letter “P”. After awhile, the traps can get obstructed with things, such as cooking grease or food pieces in kitchen drains, or hair and soap scum in bathtubs. Slow running drains and partly obstructed and drains that do not drain are certainly completely clogged.

Cleaning An Obstruction

The first thing to do to unblock a bathtub drain is to check it and see if you can locate what is blocking it. When it comes to bathtubs, it is frequently hair and soap scum that will obstruct a drain. In case you locate hair in the bottom of the drain, you can just reach in and pull the blockage out. Alternatively, you can use a pair of tweezers or needle nose pliers to unblock the drain.

Making Use of a Plunger

In case you cannot locate the blockage, your next step is to try plunging the drain. A plumber’s helper, known as plunger to some of us, is one of the first devices a professional would use in order to clean an obstructed drain. Fill enough water in the bathtub or sink to cover the bottom of the plunger, block the overflow with a rag, put the plunger over the drain and pressure it up and down five or six times. The squeezing should clean any blockage and open up the pipe. Lift up the plunger and the water must fastly drain away. Repeat the process if it does not work.

When it come some bathtubs, the drain stopper is adhered to the overflow plate. The overflow plate is occasionally held in place by two screws and, once you get rid of them, you may kindly eliminate the overflow plate.

Snaking a Drain

In case a plunger will not clean an obstruction, a “snake”, which is a long malleable steel cable wound on a handle, is the next thing you should look into. In a sink, you just put the snake down the drain, however on a bathtub, you will need put the snake down over the overflow plate opening. Begin by putting about three feet of the snake into the opening, then you may notice some struggle as you put the snake through the trap. The snake must either dissolve the blockage by pushing its way over it or your turning will hook the end of the snake onto the blockage.

Once the snake is over the trap, move the cable back and forth over the drainpipe whilst still turning it. You might notice the blockage when the snake hits it. Attempt running some water down the drain whilst moving the snake in the drain and, in case the blockage is gone, the drain will run well. You can repeat this method to make sure that the drain is clean and free of clog. Be careful so you do not go too far when snaking a drain since you may have complications if you do so and, in case this occurs, ask for a specialist assistance.

What About Chemicals?

Some individuals believe that making use of chemicals to clean a drain is an alternative, but any chemicals will break down a blockage are very caustic and harmful to the environment.

Marinating Clean Drains

It is better to avoid a blockage from occurring in first place, since cleaning a clogged drain is not fun. You can find some tips below on how you can maintain your bathtub drains free:

Do not drop little fragments of soap down the drain thinking that they will break down and wash away. This is exactly how soap forms in a drain.

Make use of strainers in eveyr drain to avoid hairs going down the drain. It is more simple to clean a strainer once a month than unclog a drain every six.

Once a month, splash a kettle filled with boiling water down the drain as this will melt any grease, body oil, and wash it away before it can form a clog.

Every three months or so, splash a half cup of baking soda in the drain then bit by bit include a half cup of vinegar. Allow the combination sit in the drain for a few minutes nad then rinse it away by running a good quantity of hot water down the drain.

Leave A Reply

Your email address will not be published.